供应AKLC400蓝宝石切削液

AKLC400蓝宝石切削液 AKLC400半导体切削液 AKLC400太阳能硅片切削液 蓝宝石切削液 半导体切削液 太阳能硅片切削液 Application: Diamond Wire Sawing Process 用途：金刚石线锯流程 AKLC400 Coolant- lubricant is a biodegradable water based, non caustic material AKLC400系列冷却剂-润滑剂是一种可生物降解、水性、非碱性物质 Dilution ratio of DI /RO water: Slicing Fluid is 10:1 - 50 :1 去离子水/反渗透水溶液比例:切片液 - 10:1至50:1 Effectively reduces the surface tension of cutting/slicing water solution to about 22.0 mN/m 能够有效地将切削/切片水溶液的表面张力降低到大约22.0 mN/m Increases heat transfer (heat dissipation) hence reduces thermal stress 可以加快传热(散热)速度，减少生热和热应力 Outstanding wetting and rinsing properties 极好的湿润和冲洗功能 Environmental Benefits and Cost 环保优势和成本 Biodegradable, non-hazardous and hence easily disposable 可生物降解、无危害，可以很容易进行处置 Biochemical Oxygen Demand (BOD) < 2.0 mg/L (BOD less than 2.0 mg/L) 生化需氧量(BOD) < 2.0 mg/L (BOD小于2.0 mg/L) Chemical Oxygen Demand (COD) < 10.0 mg/L (COD less than 10.0 mg/L) 化学需氧量(COD) < 10.0 mg/L (COD小于10.0 mg/L) Elimination of Slurry management 不必进行砂浆管理 No PEG & SiC hazardous waste management 不必进行聚乙二醇(PEG)和碳化硅(SiC)等危险废物管理 该产品用于蓝宝石多线切割，能有效延长金钢线的使用寿命，降低生产成本 专业代理美国UDM硅片切削液 蓝宝石切削液 蓝宝石切割液 晶体切割液 晶体切削液